Professional device designed for testing and calibration of electromagnetic and piezoelectric injectors Common Rail

Single channel test bench Diesel Easy BlueBench for testing of Common Rail injectors

Dual channel Diesel Easy BlueBench test bench for checking and coding two injectors simultaniusly

Test bench Diesel Easy Modern for Common Rail injectors and injection pumps

Dual channel test bench equipped with separate zones designed for testing and coding of Common Rail injectors and pumps

It allows to control the injection start pressure, tightness on the atomizer locking cone, needle mobility, quality of fuel atomization, injector hydrosealing.

Allows repair and adjustment of CAT 320D excavator Common Rail injectors.

Injector atomization quality test chamber. Works as an extractor.

Universal adapter for CR truck injectors (Bosch, Denso) is designed for connection of supply and return drain.

The kit includes special adapters and adapters for precise adjustment according to the fuel system manufacturer's test plans.

The main purpose of the kit is to service diesel injectors of cars and trucks with Common Rail system.

Special slipway is designed for assembly / disassembly of Common Rail fuel pumps.

Tooling for filling the Piezo Bosch intectors compensator

Fuel Receiver 7 - 9 ММ

To ensure a stable back-up pressure required for proper operation of the injector

Holder of fuel injection pump Siemens

Coupling tighten wrench

High pressure pump flange Siemens Ø 50

High pressure pump flange Denso HP0

High pressure pump flange Siemens K9K

High pressure pump flange Ø 68 (universal)

High pressure pump flange Bosch CP3 Ø 50

High pressure pump flange Ø 68

High pressure pump flange Ø 50 (universal)

High pressure pump flange Bosch CP3

High pressure pump flange Bosch CP1

High pressure pump flange Denso HP 2-3-4

High pressure pump flange Delphi DFP1

Mounting flange HP0-6WF1

Сoupling 25 mm (spline)

Сoupling 25 mm (nut)

Сoupling 25 mm

Сoupling 10x23 mm

Сoupling 10x22 mm

Сoupling 9 mm

Сoupling 8 mm

Сoupling Siemens 22 mm

Plug 24x1,5

Pressure regulator plug 24x1,5

Adapter 24x1,5 - 14x1,5

Adapter 18x1,5 - 14x1,5

Adapter 14х1,5

Adapter 14х1,5 - 12x1

Plug 14x1,5

Plug 18x1,5

Emergency pressure sensor housing

Plug with tapered insertion

Injector extension 24x1,5 - 14x1,5

Uses for connection of high pressure pumps and injectors to the bench's high pressure line

Uses for connection of high pressure pumps and injectors to the bench's high pressure line

Bosch stand valve. Uses to create pressure in the backflow line of Piezo Bosch fuel injectors

Working range up to 2400 Bar

Working range up to 2400 Bar

Working range up to 2400 Bar

Shaft coupling 10 mm

Shaft coupling 9 mm

Shaft coupling 8 mm

Pump connection coupling, slot size 5 mm

Injector testing stand holder (complete set)

Working range up to 2400 Bar

Fuel rail with liquid cooling of regulators

Air-cooled regulator, possible connection of an M18x1.5 thread pressure sensor

Comes with the Express Tester PLUS

High pressure pump stand holder

Slipway for injector disassembly

Connection Flange for Bosch СP2

Connection Flange for Bosch CP4 S1-S2

Connection Flange Bosch CP3.4

Connection Flange for Bosch Bosch CP4 HS1-HS2

Connection Flange for Bosch CP3 (Mercedes)

Connection Flange CR (Mercedes) 69,5 мм

Connection Flange Bosch CP3 68 mm (Mercedes)

Connection Flange for Bosch 107 мм

Connection Flange for VE high pressure pump, CR 50 mm (Renault, Peugeot, Mitsubishi, BMW)

Pump connection coupling, slot size 4 mm

Shtutser podachi

Small filters wrench

Filtration unit for detecting metal and other abrasive particles inside of the high pressure fuel pump being tested

Fine cleaning filter filtering unit

Fine filter for cleaning of test fluid measurement circuit (complete set)

Inline fuel filter. Filtration rate: 10 micron

Filtering unit, inline fuel filter. Filtration rate: 10 micron

Cable for connection to Bosch/Mercedes regulator - 500 mm (DE.2.006.6)

Bosch pressure sensor connection cable - Modern (DE.3.001.5)

Cable for connecting universal injectors (to pressure regulator - DE.2.017.1)

Cable for connection to Bosch/Mercedes regulator - Modern (DE.2.006.6)

Delphi/Siemens Injectors - (DE.0.013.1)

Bosch pressure sensor connection cable - Modern Split (DE.3.001.4)

Connection cable dual for universal caps Modern Split - (DE.1.006.2)

Connection cable dual for universal caps BlueBench (Dual-channel) - (DE.1.006.2)

Connection cable single for universal caps BlueBench - Modern - (DE.1.001.4)

PIEZO-SIEMENS cap (DE.0.006.1)

PIEZO-BOSCH cap (DE.0.005.1)

Universal cap 2 (DE.0.008.1)

Universal cap 1 (DE.0.007.1)

MULTY Type 3 cap (DE.0.009.1)

DENSO Type 2 cap (DE.0.012.1)

DENSO cap (DE.0.004.1)

DELPHI Euro 5 cap (DE.0.003.1)

DELPHI cap (DE.0.002.1)

BOSCH cap (DE.0.001.1)

Crin 4 BlueBench (Single channel - Dual channel - DE.1.019.3)

Crin 4 Modern Split (DE.1.019.1)

DENSO Type 2 cap (DE.0.012.1)

Crin 4 Modern (DE.1.019.2)

Adapter for connection and synchronization of HP0

MULTY Type 3 cap (DE.0.009.1)

DELPHI Euro 5 cap (DE.0.003.1)

DENSO cap (DE.0.004.1)

PIEZO-SIEMENS cap (DE.0.006.1)

Calibration cap for RLC meter (DE.0.000.1)

Universal cap 2 (DE.0.008.1)

DELPHI cap (DE.0.002.1)

PIEZO-BOSCH cap (DE.0.005.1)

Universal cap 1 (DE.0.007.1)

BOSCH cap (DE.0.001.1)

Connection cable for the injector body, shielded (DE.6.002.1) 

Connection cable for universal caps, shielded (DE.1.005.1)

Connection cable for Bosch pressure sensor (DE.3.001.1)